Gas Range No Power or Ignition Failure – Fix Wire Harness WS01F08465 Fast

Intermittent burner ignition, dead control panel, or complete loss of power to your GE Café gas range is almost always traced back to a failed wire harness. When the harness degrades, electrical signals to the igniter, burner valves, and oven control board are interrupted — causing unpredictable failures across the entire appliance. ⚡ Don't let a $37 part sideline a premium range. Part WS01F08465 is the genuine OEM wire harness that restores full electrical continuity and gets your range back to factory performance.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Your range is a GE Café or Monogram dual-fuel or gas model (CC2S / C2S series)
• ✔ Your model number matches the confirmed compatible list below
• ✔ You have intermittent or complete ignition failure, or no power to controls
• ✔ You have verified the issue is not a tripped breaker or faulty igniter module
• ✔ ONLY problem is a damaged, burnt, or broken wire harness connection

🔧 Common Symptoms

• One or more burners will not ignite or ignite intermittently
• Control panel is unresponsive or partially dead
• Oven does not heat despite burners working
• Clicking sound continues after burner is lit
• Visible burn marks, melting, or corrosion on existing harness
• Error codes on digital display related to control board communication

✔ If these symptoms match, the wire harness is the most likely failed component in the system.

✔ In most cases, replacing this wire harness restores normal operation immediately.

📦 Part Details

• Part Number: WS01F08465
• Type: Wire Harness – Gas Range Electrical Assembly
• Diagram Position: Item #37
• Brands: GE Café, Monogram (CC2S / C2S series)

⚙️ Installation Notes

Skill Level: Moderate — 30–60 minutes. Disconnect power at the breaker before beginning. Access the harness by removing the rear panel or control console depending on your model. Disconnect the old harness connectors one at a time and route the new harness along the same path. Reconnect all terminals firmly — loose connections are the #1 cause of repeat failures. Restore power and test all burners and oven functions before reassembling panels.

💡 Pro Tip

Model hub pages: C2S900P2M1S1, C2S950P4M1W2, C2S986SEL1SS, CC2S900M2N1S5, CC2S900P2M1S1, CC2S900P2M2S1, CC2S900P3M1D1, CC2S900P3M2D1, CC2S900P4M1W2, CC2S900P4M2W2, CC2S950M2N1S5, CC2S950P2M1S1, CC2S950P2M2S1, CC2S950P3M1D1, CC2S950P4M1W2, CC2S986SEL1SS, CC2S986SEL2SS, CC2S995SEL1SS, CC2S995SEL2SS

✓ Model-Specific Repair Pages