GE Range Burners Not Igniting or Clicking Continuously? Spark Module WS01F08566 – Fix Ignition Failure Fast

If your GE Café or Profile range burners won’t ignite, click continuously when the burners are off, or spark randomly across the cooktop, the spark module is the most common failed component. In most GE gas and dual-fuel ranges, the spark module receives the signal from the ignition switch and delivers the high-voltage pulse to the spark electrode at each burner. When it fails, one or all burners lose ignition entirely, the module clicks non-stop, or sparking becomes erratic and uncontrolled. ⚡ Common failure point on GE Café and Profile gas and dual-fuel range platforms. Part WS01F08566 is the genuine OEM replacement spark module that restores reliable, consistent ignition across all surface burners immediately.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Range has power and oven functions work normally
• ✔ Gas supply confirmed on — burners light manually with a match or lighter
• ✔ Spark electrodes and igniter caps are clean and correctly seated
• ✔ Ignition switch confirmed functional — clicking is heard when knob is turned
• ✔ ONLY problem is no spark, continuous clicking, random sparking, or burner won’t ignite from the knob

Not sure? Send us your model number — we’ll confirm before you order.

🔧 Common Symptoms

• Burners not igniting — no spark when knob is turned to ignite
• Continuous clicking from the igniter even when all burners are off
• Random sparking on one or all burners without the knob being turned
• Burner ignites but immediately goes out — intermittent spark signal
• Only some burners spark — others have no ignition at all
• Burner requires multiple attempts to light even with gas confirmed on

✔ If these symptoms match, the spark module is the most likely failed component in the system.

✔ In most cases, replacing the spark module restores reliable ignition across all burners immediately.

📦 Part Details

• Part Number: WS01F08566
• Type: Range spark module (ignition module) — controls high-voltage ignition pulse to all surface burner spark electrodes, UL and CSA certified
• Replaces: 164D9720P001 (no modification required)
• Brands: GE Café, GE Profile (gas and dual-fuel range platforms)

⚙️ Installation

Skill Level: Moderate — 20–35 minutes. Disconnect power to the range at the breaker before beginning. The spark module is typically located in the control panel area or beneath the cooktop depending on the model. Photograph all wire harness connector positions before disconnecting, then remove the old module and install the new WS01F08566 in the same position. Reconnect all harnesses in the photographed positions, restore power, and test each burner knob to confirm reliable ignition.

✓ Compatible Models

Confirmed compatible with C2S900P2M1S1, C2S950P4M1W2, C2S986SEL1SS, C2Y366P2T1S1, C2Y486P2T1S1, CC2S900P2M1S1, CC2S900P3M1D1, CC2S900P4M1W2, CC2S950P2M1S1, CC2S950P3M1D1, CC2S950P4M1W2, CC2S986SEL1SS, CC2S995SEL1SS, CGY366P2T1S1, CGY366P3T1D1, CGY366P4T1W2, plus additional GE Café and Profile gas and dual-fuel range models. Contact us to verify your model number before ordering.

💡 Pro Tip