BURNER HEAT DOES NOT RESPOND CORRECTLY TO KNOB ROTATION
GE / Mabe Range Burner Control Knob, Minivalve, Black WS01L05899, Replaces WB03K10216, WG02L01764, Fixes Burner heat does not respond correctly to knob rotation
Black minivalve burner-control knob for a gas range. The knob controls the gas flow and heat level of a surface burner.
Part WS01L05899Replaces WB03K10216, WG02L01764GE / Mabe
Black minivalve burner-control knob for a gas range. The knob controls the gas flow and heat level of a surface burner.
Is This the Right Part?
Part NumberWS01L05899
ReplacesWB03K10216, WG02L01764
ManufacturerGE / Mabe
Appliance TypeRange
Part TypeRange Burner Control Knob, Minivalve, Black
Common Symptoms
- Knob is cracked, stripped, loose, or physically damaged.
- Knob will not turn or will not select the intended burner setting.
- Burner flame does not change as expected when the knob is rotated.
- Knob turns without properly rotating the burner-valve stem.
Check Before Replacing
- With the burner off and the range cool, inspect the knob for cracks, deformation, stripping, or excessive looseness.
- Confirm that the knob is seated on the correct burner-valve stem and that its indicator aligns with the OFF position.
- If safe to do so, compare the suspect knob with an identical functioning knob for visible damage or fit differences; do not operate the range with a damaged or loose knob.
- If flame output does not change correctly, distinguish a damaged knob from a loose or damaged valve stem before replacing parts; the knob alone does not confirm the diagnosis.
Pro Tip
Remove and reinstall the knob straight onto the valve stem without forcing it; a knob that spins, wobbles, or will not align with OFF may have a damaged hub or may not match the valve stem.
Part Details
Part NumberWS01L05899
Part TypeRange Burner Control Knob, Minivalve, Black
ManufacturerGE / Mabe
Appliance TypeRange
Primary FunctionControls gas flow and heat level for a surface burner on a compatible gas range.
Cross ReferencesWB03K10216, WG02L01764
Key Features
- Genuine GE appliance replacement part.
- Black finish.
- Range surface-burner control knob.
- Minivalve-style knob.
- Designed to rotate the burner-valve stem and adjust surface-burner heat.
Installation Notes
- Turn the burner control to OFF and allow the range to cool before handling the knob.
- Pull the old knob straight off the valve stem; do not pry against the control panel.
- Align the replacement knob with the valve stem and press it straight into place.
- After installation, verify that the knob is secure, aligns with OFF, and turns normally before using the burner.
- If the knob does not fit or the valve stem is loose, stop installation and verify the exact appliance model and control assembly.
Verified Compatible Models
JGB250SET2SS, JGBP28SET2SS, JGBS04BEM3WH, JGBS06PPM1WH, JGBS06PPM3CT, JGBS06PPM5CT, JGBS19DEN4WW, JGSS05DEM1BB
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
