LG WT1701CW Washer Not Draining? Safe Checks and Matching Drain Parts
Direct answer: If your LG WT1701CW washer is not draining or leaves water in the tub, begin with safe external checks: unplug the washer, inspect the drain hose for kinks or crushing, and check whether the household standpipe or drainpipe is backing up. If those checks do not explain the problem, the washer’s drain pump or drain hose assembly may be involved. The symptom alone cannot identify one failed component with certainty.
Several problems can produce similar results, including a restricted hose, a blocked household drain, a pump that is obstructed or no longer operating correctly, or a related drainage fault. Before buying a replacement, confirm the full model label on the appliance and compare the part number printed on the existing component or listed in your documentation.
What should you check first on an LG WT1701CW that will not drain?
Start by noting how much water remains. A small amount of residual water is different from a tub that is substantially full after the cycle. Also note whether the clothes are still saturated, whether the washer makes a humming or draining sound, and whether an OE error appears. These observations can help distinguish a slow restriction from a pump or other drainage issue, but they do not confirm a replacement part by themselves.
Before inspecting the washer, switch it off and unplug it. Do not reach into standing water or remove components while the appliance is connected to power. If there is a large amount of water, a leak, a burning or electrical smell, repeated breaker trips, or unusual mechanical noise, stop troubleshooting and arrange qualified appliance service.
Could the LG WT1701CW drain hose or household drain be restricted?
Yes. A kinked, crushed, or blocked drain hose can slow or prevent draining. Look behind the washer for sharp bends, compression against the wall, or visible damage. Check that the hose is positioned as described in the appliance documentation and that its outlet is not obstructed. Avoid making changes based only on a general internet diagram because installation details can vary.
The household standpipe or drainpipe can also be the source of the problem. If water backs up from the pipe when the washer attempts to drain, the issue may be in the home’s plumbing rather than inside the LG WT1701CW. A plumbing professional may be needed if the household drain is restricted.
Do not pull forcefully on the hose or operate the washer with a damaged hose. A compromised hose can leak and cause water damage.
Could the drain pump be causing water to remain in the tub?
It could. The drain pump moves water out of the washer, and a restriction, obstruction, or pump fault may result in standing water, slow draining, or a washer that will not complete a drain-and-spin sequence. A humming sound without effective water movement can be a useful observation, but it is not proof that the pump is the only defective component. A blocked hose or household drain can create a similar symptom.
If external checks do not identify the cause, consult the LG WT1701CW owner documentation for the approved drain, drain-and-spin, lint-filter, or drain-cleanout procedure available for your appliance. Do not disassemble the washer unless you are qualified to do so and can follow the correct safety procedure.
Which verified parts match the LG WT1701CW washer?
XPart Supply’s verified model hub for the LG WT1701CW Washer identifies the following buyable components for this not-draining issue:
- 5859EA1004G — Washer Drain Pump: a verified matching pump listing for the LG WT1701CW.
- 5859EA1004P — Drain Pump Assembly: a verified matching drain pump assembly listing for the LG WT1701CW.
- AEM73732901 — Washer Drain Hose Assembly: a verified matching hose assembly listing for the LG WT1701CW.
These products are presented as verified matches in the model data, but the symptom does not establish which component needs replacement. Compare the part number carefully and confirm the model label before ordering. If your appliance label includes a longer model designation or suffix, record the complete information and verify it against the product details.
How can you tell whether the hose or pump is more likely involved?
There is no reliable diagnosis from the symptom alone. A visible kink, crushed section, or known blockage makes the AEM73732901 Washer Drain Hose Assembly relevant to inspect. If the hose and household drain appear clear but the washer still retains substantial water, the 5859EA1004G Washer Drain Pump or 5859EA1004P Drain Pump Assembly may be worth investigating by a qualified technician.
Do not assume that a pump replacement will correct every no-drain complaint. A household plumbing restriction, wiring issue, control problem, or installation condition may produce similar behavior. If the washer makes abnormal noises, leaks, smells hot, or repeatedly stops, professional diagnosis is the safer next step.
What if the LG WT1701CW will not drain or spin?
Check whether water remains before focusing on the spin function. Many washers will not proceed normally when drainage has not completed. Unplug the appliance, inspect the external hose and household drain, and consult the owner documentation for the appropriate drain-and-spin or forced-drain procedure. If the tub remains substantially full after these checks, avoid repeated cycles and arrange service.
When should you stop troubleshooting the LG WT1701CW?
Stop and seek qualified help if you find a leak, damaged electrical wiring, a burning smell, repeated breaker trips, severe vibration, unusual grinding, or water that cannot be safely removed. Service is also appropriate when the washer repeatedly displays an OE error, retains substantial water after a clear hose and household drain have been checked, or requires internal disassembly.
For model-specific shopping, use the LG WT1701CW parts hub. It brings together the verified drain pump, drain pump assembly, and drain hose assembly listed for this issue. Confirm the appliance model label and part number before purchase.
LG WT1701CW not-draining FAQ
Is a small amount of water normal?
A small residual amount may differ from a tub full of standing water. Quantify what remains and compare the behavior across cycles. Substantial or recurring water retention needs further checking.
Does an OE error prove the drain pump failed?
No. An OE error can occur with a drainage problem, but the cause may involve the hose, household drain, pump, or another washer condition. Inspect safely and avoid assuming one part is defective.
Which parts are verified for the LG WT1701CW?
The verified listings are 5859EA1004G Washer Drain Pump, 5859EA1004P Drain Pump Assembly, and AEM73732901 Washer Drain Hose Assembly. Confirm the full model label and part number before ordering.