Dryer Not Cycling? 131789200 Dryer Timer – Fix Cycle Control Fast
If your dryer runs continuously, stops mid-cycle, or won't advance through drying cycles, the timer is the most likely culprit. In most Frigidaire, Kenmore, and Crosley dryers, the timer controls the entire cycle sequence — when it fails, the dryer either won't stop, won't start a timed cycle, or gets stuck on one setting. ⚡ Common failure point in Frigidaire-built dryers. Part 131789200 is the genuine OEM replacement timer that restores accurate cycle control and normal drying operation.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Dryer powers on and drum spins normally
- ✔ Heat function works (drum gets warm/hot)
- ✔ Power supply and door switch confirmed OK
- ✔ Start switch and belt are functional
- ✔ ONLY problem is the cycle not advancing, running non-stop, or timer knob not responding
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Dryer runs continuously and won't shut off — most common complaint
- Timer knob turns but cycle does not advance
- Dryer stops mid-cycle unexpectedly
- Timed dry setting has no effect
- Dryer won't start on timed cycles but works on other settings
- Clothes still damp after full timed cycle completes
✔ If these symptoms match, the timer is the most likely failed component in the system.
✔ In most cases, replacing the dryer timer restores normal cycle operation immediately.
📦 Part Details
- Part Number: 131789200
- Type: Electromechanical dryer cycle timer assembly
- Replaces: OEM direct-fit timer assembly — supersedes 131789200 (no modification required)
- Brands: Frigidaire, Kenmore, Crosley
While the timer panel is open, inspect the timer knob and control panel wiring harness for heat damage or cracked connectors — these are common secondary failures on the same service call. Replacing a damaged knob at the same time saves a repeat disassembly.
⚙️ Installation
Skill Level: EASY — 20–30 minutes. Unplug the dryer before beginning. Remove the control panel screws, disconnect the wiring harness from the old timer, and transfer the knob to the new unit before securing. No special tools required — a standard Phillips screwdriver is sufficient.
💡 Pro Tip
The 131789200 timer has multiple terminals and the harness must be reconnected in the correct positions. A quick photo before removal eliminates any guesswork on reassembly and prevents a no-start condition caused by a misrouted wire.
✓ Model Repair Pages
CDG2000FW1, CDG2000FW0, CDE2000FW0, LGQ332DS0, LEQ332DS0, GLGQ332MAS0, GLGQ332AS4, GLGQ332AS3, GLGQ332AS2, GLGQ332AS1, GLGQ332AS0, GLEQ332AS2, GLEQ332AS1, GLEQ332AS0, FGQ332ES2, FGQ332ES1, FGQ332ES0, FEQ332ES0, FEQ332CES0, FD955EAW0, CRGF342AS4, CRGF342AS3, CRGF342AS2, CRGF342AS1, CRGF342AS0, CREF342AS2, CREF342AS1, CREF342AS0, BEF332CES0, 41799877990, 41799872990, 41799817990, 41799812990, 41790872992, 41790872991, 41790872990, 41790817990, 41790814002, 41790814001, 41790814000, 41790812992, 41790812991, 41790812990, 41779052991, 41779052990, 41779042991, 41779042990, 41769052991, 41769052990, 41769042991, 41769042990
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
