Frigidaire Range Display Blank, Buttons Not Responding, or Showing Error Codes? The Control Panel Is the Most Common Cause.
The range control panel is the user interface between you and the oven — it houses the touchpad, display, and the electronics that translate button presses into oven commands. When it fails, the display goes blank or dim, buttons stop responding, error codes appear that won’t clear, or the oven refuses to start despite having power. The 318922144 is the genuine OEM replacement control panel for compatible Frigidaire and Electrolux electric ranges, restoring full display function, responsive controls, and reliable oven operation.
Symptoms of a Failed Range Control Panel
- Display completely blank or shows only partial segments
- Touchpad buttons unresponsive or require multiple presses
- Specific buttons work but others don’t
- Error codes displayed on the panel that won’t clear
- Oven won’t start despite display appearing normal
- Oven starts randomly or selects wrong temperature/mode
- Timer or clock functions not working
- Display flickering, dim, or showing garbled characters
- Control panel warm or hot to the touch
- Oven locks up mid-cycle and requires power reset to clear
Part Details
- OEM Part Number: 318922144
- Type: Range Control Panel (User Interface / Touchpad Assembly)
- Compatible Brands: Frigidaire, Electrolux (verify by model number)
- Condition Options: New (OEM) · Used (Certified Pre-Owned, tested)
- Function: Houses the touchpad, display, and user interface electronics that control oven temperature, cooking modes, timer, and clock functions
A blank display or unresponsive touchpad is not always a failed control panel. Before ordering, check two things: (1) the ribbon cable connection between the control panel and the main control board — a loose or corroded ribbon cable causes intermittent or complete loss of display and button response without any fault in the panel itself; and (2) the main control board — if the board isn’t sending power or signals to the panel, the panel will appear dead even when it’s fine. Confirm the ribbon cable is fully seated and undamaged before committing to a panel replacement.
Installation Notes
- Skill Level: Intermediate — requires removal of the back panel or control console and ribbon cable disconnection
- Disconnect power at the breaker or unplug the range before starting
- Photograph the ribbon cable routing and connector orientation before disconnecting
- Handle ribbon cables carefully — they tear easily and connectors break if forced
- Verify the new panel’s ribbon cable connector matches the existing harness before installation
- Do not overtighten any mounting screws — control panel housings crack easily
- Restore power and run a full function test across all buttons and display segments after installation
- If error codes persist after replacement, the main control board may also require attention
Compatible Models
Contact us with your full Frigidaire or Electrolux model number to confirm fitment before ordering.
New vs. Used — Which Option Is Right for You?
The New variant is a fresh OEM-spec control panel — ideal when you want full service life and peace of mind on a high-use appliance. The Used variant is a Certified Pre-Owned panel pulled from a working unit and tested before sale — a practical choice for an older range or when cost is a priority. Both options ship from XPart Supply Ltd. in Canada.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
