Equivalent PartsCross-reference listings may have additional stockCheck Stock →
DRYER DRUM DOES NOT SPIN
Whirlpool Dryer drum drive belt 3394652, Fixes Dryer drum does not spin
Whirlpool OEM multi-rib drum drive belt for dryers. The belt connects the motor pulley to the dryer drum and enables drum rotation. Reported dimensions are approximately 79-1/8 inches long and 1/4 inch wide, with four ribs/grooves.
Part 3394652Replaces 26000345675, 8066064, 4319392, 345675Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number3394652
Replaces26000345675, 8066064, 4319392, 345675
ManufacturerWhirlpool
Appliance TypeDryer
Part TypeDryer drum drive belt
✅ Cross Reference Information
Current Part Number3394652
Verified Previous OEM Numbers26000345675, 8066064, 4319392, 345675
Common Symptoms
- Dryer drum stops turning
- Dryer operates with a noisy or slipping drum drive
- Drum spins unusually easily by hand when the belt is broken or disengaged
- Burning-rubber odor may occur when a worn belt slips
Check Before Replacing
- Disconnect electrical power before inspection.
- With power disconnected, rotate the drum by hand and note whether it turns unusually easily.
- Visually inspect the belt for breakage, separation, excessive cracking, fraying, or displacement from the drum and pulleys.
- If the belt is damaged, inspect the accessible motor and idler pulleys for obvious binding or damage before installing a replacement.
Pro Tip
If the belt has failed prematurely, check for a binding idler pulley or restricted drum support before fitting the new belt; otherwise the replacement may fail again.
Part Details
Part Number3394652
Part TypeDryer drum drive belt
ManufacturerWhirlpool
Appliance TypeDryer
Primary FunctionTransmits motor rotation to the dryer drum through the drive and tension pulleys, enabling drum rotation.
Installation Notes
- Disconnect power before beginning service.
- Use the dryer model's service instructions because panel-access and belt-routing procedures vary by model.
- Route the belt around the drum and the specified drive/tension pulleys, following the original belt path or model-specific diagram.
- Confirm that the belt is seated correctly and that the drum turns smoothly by hand before restoring power.
- Wear appropriate hand protection when accessing internal dryer panels because sheet-metal edges may be sharp.
Verified Compatible Models
10688419100, 10688419300, 110088732791, 1101820296, 1101820299, 1107208300, 1107208301, 1107208350, 1107218370, 11078410100, 11078410110, 11078410200, 11078410210, 11078410400, 11078410410
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
