⚠ This part has been superseded by a newer OEM part number.
4581EL2002C has been replaced by AGM75510755. We recommend ordering the current part for guaranteed fit and full lifespan.
Order AGM75510755 Instead →LG Dryer Drum Support Roller Assembly 4581EL2002C — Fixes Drum Noise or Squealing
LG dryer squealing, thumping or drum not turning smoothly? In select LG dryers, worn or seized drum support rollers are one possible cause of squealing, thumping or grinding noise during operation. When they wear out, the drum may wobble, drag or produce loud noise as it rotates, and in severe cases the drum may stop turning entirely. Part 4581EL2002C is the genuine LG OEM drum support roller assembly used in select LG dryers. Note: this part number has been superseded by AGM75510755.
❓ Is This the Right Part?
Worn drum support rollers are one possible cause of dryer noise or drum rotation problems. Confirm the complete dryer model before ordering.
- ✔ Dryer powers on and heats normally
- ✔ Drive belt confirmed intact and properly seated
- ✔ Idler pulley confirmed functional
- ✔ ONLY problem is squealing, thumping or grinding noise during drum rotation
Not sure? Send us your model number — we’ll confirm before you order.
🔧 Common Symptoms
- Loud squealing or squeaking noise during the dry cycle
- Thumping or rumbling sound as the drum rotates
- Grinding noise from inside the dryer cabinet
- Drum wobbling or not rotating smoothly
May correct drum noise or rotation problems when inspection confirms that the original support rollers are worn, flat-spotted or seized. Inspect the drive belt and idler pulley before replacing the rollers.
📦 Part Details
- Part Number: 4581EL2002C
- Type: Dryer Drum Support Roller Assembly
- Superseded by: AGM75510755
- Brand: LG
- Condition: Genuine OEM — New
Drum support rollers wear at similar rates — if one is worn, the others are likely close behind. Replace all rollers at the same time to avoid a repeat repair. While the drum is out, inspect the drive belt for cracking or fraying and the idler pulley for smooth rotation. Replacing all three components in one visit saves significant labour time.
⚙️ Installation
Skill Level: Moderate. Disconnect electrical power before servicing. Remove the dryer front panel or top panel to access the drum, slide the drum out to expose the support rollers, remove the roller retaining clips and worn rollers, install the new roller assembly and reassemble in reverse order before restoring power and running a test cycle to confirm quiet operation.
✓ Compatible Models
Confirm your complete LG dryer model number before ordering — this assembly fits select LG dryer models.
Contact us to verify your model number before ordering.
💡 Pro Tip
With the drum removed, spin each support roller by hand. A good roller spins freely and quietly. A worn roller will feel rough, wobble on its shaft or spin unevenly. If any roller shows resistance or wobble, replace the full set — partial replacement leads to repeat noise complaints within months.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
