DRYER LOSES POWER OR HAS INTERMITTENT OPERATION BECAUSE AN ELECTRICAL CONNECTION IN THE MAIN HARNESS IS OPEN, LOOSE, OR DAMAGED
Frigidaire / Electrolux Dryer Main wiring harness 5304521235, Fixes Dryer loses power or has intermittent operation because an electrical connection in the main harness is open, loose, or damaged
Genuine OEM main wiring harness that supplies power and connects electrical components in select Frigidaire and Electrolux dryers.
Part 5304521235Replaces 5304513588Frigidaire / Electrolux
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number5304521235
Replaces5304513588
ManufacturerFrigidaire / Electrolux
Appliance TypeDryer
Part TypeMain wiring harness
✅ Cross Reference Information
Current Part Number5304521235
Replaces5304513588
Common Symptoms
- Dryer does not power on or powers off intermittently.
- Some dryer functions operate while other connected functions do not.
- Intermittent control or component operation caused by a poor harness connection.
- Visible wire, terminal, or connector damage may accompany the electrical symptom.
Check Before Replacing
- Disconnect electrical power before inspection.
- With power disconnected, visually inspect the harness for pinched, chafed, melted, or disconnected wires and connectors.
- Check that harness connectors are fully seated and that terminals are not visibly backed out, corroded, or heat-damaged.
- Compare harness routing and connector locations with the appliance wiring diagram or service documentation for the exact dryer model.
- If qualified and equipped with the correct wiring diagram, perform continuity checks on individual harness circuits with power disconnected; do not use continuity results alone to condemn the harness.
Pro Tip
Before replacing the harness, inspect connector seating and look for heat damage or chafing; a loose or damaged connection can produce similar intermittent symptoms.
Part Details
Part Number5304521235
Part TypeMain wiring harness
ManufacturerFrigidaire / Electrolux
Appliance TypeDryer
Primary FunctionDistributes electrical power and connects the dryer's main electrical components, including control and operating circuits.
Installation Notes
- Disconnect and unplug the dryer before installation.
- Wear work gloves because cabinet edges and harness components may be sharp.
- Transfer and reconnect each connector to the corresponding location, following the exact model wiring diagram.
- Route the replacement harness as the original was routed and keep wires clear of moving parts, sharp edges, and heat sources.
- Do not force connectors or alter the harness; stop if connector locations or wire routing do not match the exact appliance documentation.
Verified Compatible Models
EFME527UIW0, EFME527UIW1, EFME527UIW2, EFME527UTT0, EFME527UTT1, EFME527UTT2, EFME627UIW0, EFME627UIW1, EFME627UIW2, EFME627UTT0, EFME627UTT1, EFME627UTT2, EFME628WTT00, ELFE7537AT0, ELFE7537AW0
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM