The drum wrapper is the outer cylindrical housing that surrounds the dryer drum and forms the interior cabinet walls. When it cracks, dents, or warps — from impact, overloading, or a seized drum support — the drum begins to contact the wrapper during rotation, producing a loud scraping, grinding, or rhythmic thumping noise that worsens with every cycle. Left unrepaired, the drum wears grooves into the wrapper and eventually damages the drum itself. The DC97-16812H Samsung OEM Drum Wrapper is the factory-specified replacement. This is a discontinued NLA part — 1 unit in stock. Final Sale, no returns or exchanges.
✓ Symptoms This Fixes
- Loud scraping or grinding noise from inside the dryer cabinet during tumbling
- Rhythmic thumping that repeats with every drum rotation
- Drum wobbling or not rotating on a true axis
- Visible cracks, dents, or deformation in the dryer cabinet interior walls
- Drum dragging or slowing during the cycle
- Noise that has progressively worsened over multiple cycles
- Drum glides or felt seal wearing unevenly due to wrapper deformation
✓ Part Details
- OEM Part Number: DC97-16812H
- Brand: Samsung OEM
- Component: Dryer drum wrapper assembly (outer drum housing / cabinet cylinder)
- Appliance Type: Samsung electric and gas dryer
- Genuine OEM: Yes — factory-specified replacement
- Availability: NLA — discontinued, 1 unit remaining, Final Sale only
- Returns: No returns or exchanges — confirm model compatibility before ordering
A damaged drum wrapper is almost always caused by a seized drum support roller or worn front drum glides that allowed the drum to drop and contact the wrapper. Before installing the new wrapper, spin each rear support roller by hand — they should spin freely and quietly. Inspect the front drum glides (felt or plastic strips on the front bulkhead) for wear through to bare metal. If the rollers or glides are not replaced at the same time, the new wrapper will sustain the same damage within months from the same root cause. This is a major disassembly — replace all wear components while the dryer is open.
✓ Installation Notes
- Skill Level: Advanced — requires near-complete dryer disassembly
- Estimated Time: 2–3 hours
- Key Steps: Disconnect power and gas (if applicable) → Remove top panel, control console, and front panel → Disconnect door switch wiring → Support drum and disconnect drive belt from motor and idler pulley → Remove drum from cabinet → Disconnect all wiring from rear bulkhead → Remove rear panel and bulkhead → Remove old drum wrapper from cabinet frame → Transfer any components (heating element housing, moisture sensor, felt seal) to new wrapper → Reassemble in reverse order → Route belt correctly over idler pulley and motor pulley before closing front panel → Restore power and run a full test cycle
- Safety: Always disconnect power and gas before beginning. This is a major disassembly — photograph every wiring connection and belt routing before removal. An incorrectly routed belt will cause the drum not to spin or the belt to snap immediately on first use.
✓ Compatible Models
Compatible with select Samsung electric and gas dryer models. Contact us with your full model number to confirm fit before ordering. Given the NLA status of this part, confirming compatibility before purchase is strongly recommended — Final Sale, no returns.
✓ Why XPart Supply
- Canadian Business Since 1996 — 30 Years of Appliance Parts Expertise
- Guaranteed Fit — OEM parts matched to your exact model
- Fast Canada-Wide Shipping
- Trusted by DIYers and Appliance Technicians Across Canada
- Expert support to confirm compatibility before you order
✓ Frequently Asked Questions
Why is this part marked Final Sale?
DC97-16812H has been discontinued by Samsung and is no longer available through the OEM supply chain. This is the last unit we have in stock. Once sold, this part will not be restocked. We strongly recommend confirming model compatibility before ordering as no returns or exchanges are accepted on this item.
What caused my drum wrapper to crack or deform?
The most common cause is a seized rear drum support roller that caused the drum to drop and grind against the wrapper. Less commonly, impact from a heavy or unbalanced load, or a broken drum glide that allowed the drum front edge to contact the cabinet. Always replace the rollers and glides at the same time as the wrapper to prevent recurrence.
Is this an advanced repair?
Yes — replacing the drum wrapper requires near-complete disassembly of the dryer including removal of the drum, front panel, rear bulkhead, and all associated wiring. Estimated time is 2–3 hours. If you are not experienced with major appliance disassembly, a qualified technician is recommended. Given the Final Sale status of this part, professional installation is strongly advised.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
