Samsung Gas Range Burner Won’t Light or Flame Is Uneven? DG62-00299A Burner Head – Fix It Fast

A cracked, clogged, or warped burner head is the most common reason a Samsung gas range burner won’t ignite or produces a weak, uneven flame. In most Samsung gas ranges, this is caused by a failed burner head assembly — the component that distributes gas evenly through the flame ports and works with the igniter to produce a consistent blue flame. When it cracks or warps from heat exposure, gas flow becomes uneven, the igniter can’t seat properly, and the burner either won’t light or produces an orange, sputtering flame. ⚡ High-wear failure point in Samsung gas ranges. Part DG62-00299A is the genuine OEM replacement burner head assembly that restores reliable ignition and a consistent, even flame immediately.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Your range powers on and the igniter clicks when the knob is turned
• ✔ Gas supply to the range is confirmed on and flowing
• ✔ Other burners on the range light normally
• ✔ The burner cap and grate are undamaged and seated correctly
• ✔ ONLY problem is this specific burner — won’t light, uneven flame, or flame goes out immediately after lighting

Not sure? Send us your model number — we’ll confirm before you order.

🔧 Common Symptoms

• Burner won’t ignite or requires multiple attempts to light — most common reason customers search for this part
• Flame is uneven, weak, or only lights on one side of the burner
• Orange or yellow flame instead of a clean blue flame
• Igniter keeps clicking after the burner is lit
• Burner lights but flame goes out immediately
• Visible cracks, chips, or warping on the burner head surface

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this burner head assembly restores reliable ignition and a consistent flame immediately.

📦 Part Details

• Part Number: DG62-00299A
• Type: OEM Gas Range Burner Head Assembly
• Replaces: Genuine OEM Samsung burner head — direct-fit replacement (no modification required)
• Brands: Samsung

⚙️ Installation

Skill Level: EASY — 15 to 20 minutes. Turn off the gas supply and disconnect power to the range before beginning. Remove the burner grate and lift off the burner cap to expose the burner head — the head lifts straight off the burner base with no tools required. Seat DG62-00299A flat onto the burner base, replace the cap and grate, restore gas and power, then test for even ignition and a consistent blue flame on all ports. Ensure the burner head is fully level on the base before replacing the cap — an off-centre head causes the same uneven flame symptoms.

✓ Compatible Models

Confirmed compatible with NE59R6631SS/AA-00, NE59R6631SG/AA-00, NE59J7630SS/AA-00, NE59J7630SS/AA-01, NE59J7630SS/AA-02, NE59J7630SW/AA-00, NE59J7750WS/AA-00, NE59J7750WS/AA-01, NE59J7750WS/AA-02, NE59J7850WG/AA-00, NE59J7850WG/AA-01, NE59J7850WG/AA-02, NE59J7850WS/AA-00, NE59J7850WS/AA-03, NE59J7650WS/AA-00, NE59J7650WS/AA-01, NE59N6630SS/AA-00, NE59N6650SS/AA-00, NE59N6650SG/AA-00, NE58K9850WS/AA-00, plus additional Samsung gas range models. Contact us to verify your model number before ordering.

💡 Pro Tip