LG Washer Has No Power? Washer Power Cord EAD40521449 — Fix Dead Washer Fast
If your LG or Kenmore front-load washer is completely dead, won’t power on, or shows signs of a burnt or damaged cord at the wall connection, the power cord is the first component to inspect and replace. In LG washers, the power cord (EAD40521449) is the primary electrical connection between your wall outlet and the washer’s control board. When it fails — due to heat damage, a loose connection, or physical wear — the washer receives no power at all, or powers on intermittently with no response to controls. ⚡ Common failure point after moving or reinstalling a washer, or after years of heat cycling at the plug and terminal connection. Part EAD40521449 is the genuine OEM LG power cord that restores safe, reliable electrical connection to your washer.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Wall outlet has been tested and confirmed live at correct voltage
- ✔ Circuit breaker is not tripped — or trips only when washer is plugged in
- ✔ Washer control board and internal wiring have been visually inspected and are intact
- ✔ ONLY problem is no power to washer, intermittent power loss, or visible cord damage at plug or terminal end
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Washer completely dead — no display, no response to any button
- Washer powers on intermittently or cuts out randomly during a cycle
- Visible burn marks, melting, or discolouration at the plug or cord end
- Burning smell near the wall outlet or washer connection point
- Circuit breaker trips when washer is plugged in
✔ If these symptoms match, the power cord is the most likely failed component in the system.
✔ In most cases, replacing the EAD40521449 power cord restores full washer operation immediately.
📦 Part Details
- Part Number: EAD40521449
- Type: Washer Power Cord — AC power supply cord, front-load washer
- Replaces: 6411ER1005K, EAD40521423, EAD40521471
- Fits Brands: LG, Kenmore (Sears), LG-built GE (GCW/TCW series), LG International (F-series, FH-series, WD-series)
- Available As: OEM (New) and Used
- HS Code: 850990 | Country of Origin: Canada
While the cord is disconnected, inspect the washer inlet valve (EBF49827803) and door latch assembly — a washer that’s been dead for an extended period may have secondary issues from moisture or inactivity. A quick visual inspection of the door latch and inlet valve while the machine is accessible can prevent a follow-up service call.
⚙️ Installation
Skill Level: EASY — 10–20 minutes. Disconnect power at the breaker before servicing. Access the rear of the washer to locate the power cord entry point. Disconnect the old cord from the terminal block or harness connector inside the machine, noting wire positions. Connect the new cord in the same configuration, secure any strain relief clamp, and restore power to test.
✓ Compatible Models
Confirmed compatible with WM2050CW, WM2277HW, WM2487HWMA, WM2801HWA, WM3001HWA, WM3360HWCA, WM3600HWA, WM3900HWA, WM4000HWA, WM4200HWA, WM5000HWA, WM8000HWA, WM9000HWA, WM9500HKA, GCWP1069CD, GCWP1069CS, TCW2013CS1, TCD1870CGG, LSWF388HVS, 79641532110, 79641538110, plus 280+ additional LG, Kenmore, and LG-built models. Contact us to verify your model number before ordering.
💡 Pro Tip
Before ordering, use a multimeter or outlet tester to confirm your wall outlet is delivering correct voltage (120V for standard washers). A dead outlet or tripped GFCI breaker is often mistaken for a failed power cord — and is a free fix. If the outlet tests good and the washer is still dead with a known-good cord, the control board is the next component to diagnose.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
