Dishwasher Not Cleaning Properly? LG Rack Assembly 3751DD1002B – Fix Unstable Loading Fast
If your LG dishwasher is leaving dishes dirty or the rack is collapsing, a failed rack assembly is the most common cause. In most LG dishwashers, the rack assembly holds dishes in position and ensures proper water spray coverage during the wash cycle. When it fails, dishes shift during the cycle, block spray arms, and come out dirty or damaged — and the problem gets worse with every load. ⚡ Common failure point in LG-built dishwashers across LDF, LDS, and LSDF series. Part 3751DD1002B is the genuine OEM replacement that restores proper dish positioning, full spray arm clearance, and consistent wash performance.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Your dishwasher powers on and runs a full cycle normally
- ✔ Water fills and drains correctly
- ✔ Water supply and inlet valve are confirmed OK
- ✔ ONLY problem is dishes not sitting securely or coming out dirty due to rack failure
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Rack collapses, tilts, or won't stay in position during the cycle
- Dishes shift and block the spray arm mid-wash
- Dishes come out dirty, spotted, or with food residue
- Rack tines broken, bent, or missing — dishes tip over during wash
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this rack assembly restores normal wash performance immediately.
📦 Part Details
- Part Number: 3751DD1002B
- Type: Lower Dish Rack Assembly — OEM LG
- Replaces: 3751DD1002A
- Brands: LG
While the rack is out, inspect your spray arm and spray arm assembly for cracks or clogged nozzles — a blocked spray arm is often the secondary cause of poor wash results and takes 5 minutes to swap while you already have access.
⚙️ Installation
Skill Level: EASY — 5–10 minutes. Disconnect power before servicing. Slide the old rack out along the rack rails, disconnect any rack clips or stop tabs, and slide the new 3751DD1002B assembly in until it seats fully on both rails. No tools required in most models.
✓ Compatible Models
Confirmed compatible with LDF6810BB, LDF6810ST, LDF6810WW, LDF7774BB, LDF7774ST, LDF7810BB, LDF7810ST, LDF7920BB, LDF7920ST, LDS5040BB, LDS5040ST, LDS5811BB, LDS5811ST, LSDF9962ST, LDT9965BD plus additional LG dishwasher models. Contact us to verify your model number before ordering.
💡 Pro Tip
If the rack was dragging or hard to slide before it failed, the rack rollers (wheel axles) are likely worn. Replacing them at the same time as the rack assembly prevents premature wear on your new part and saves a second service call — rollers are a $10–$20 add-on that extends the life of this repair significantly.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
