Whirlpool Range anti-tip bracket W10908063

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Range tilts forward or lifts at the rear when the oven door is opened or weight is placed on it.
• Rear leveling foot is not visibly seated in the anti-tip bracket slot.
• Bracket is loose, missing, obstructed, or damaged, allowing range movement.

Check Before Replacing

• With the range cool and no cookware on the door, visually confirm that the rear leveling foot is inserted into the bracket slot, using a flashlight if needed.
• Slide the range forward carefully and verify that the bracket is firmly attached to the floor or wall; do not operate the range if the bracket is loose or absent.
• Slowly test for forward movement according to the manufacturer’s anti-tip procedure. If the rear of the range lifts more than 1/2 inch without immediate resistance, stop and lower it gently.
• Check for obstructions preventing the range from sliding fully back or the rear foot from entering the bracket.

Pro Tip

Part Details

Installation Notes

• Install the bracket to the floor or wall in accordance with the range’s model-specific installation instructions.
• After positioning the range, slide it back until the rear leveling foot is engaged in the bracket slot.
• Verify that the bracket is securely fastened and that the range cannot tilt forward without immediate resistance.
• Re-engage and recheck the bracket whenever the range is moved; do not operate the range without an installed and engaged anti-tip bracket.

Verified Compatible Models

AGS6603SFS0, IEL730CS0, IGS790GS0, JDS1450DP0, JDS1450DS0, JDS1450ML1, JDS1750ML1, JES1450FS1, JES1450FS3, JES1450ML1, JES1750CEB0, JES1750FB1, WEC310S0FB4, WEC310S0FS4, WEC310SAGS3

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.