Refrigerator Filter Housing Loose or Leaking? Mounting Kit W11248063 – Fix Filter Housing Failures Fast

When your JennAir built-in column refrigerator has a loose, rattling, or leaking water filter housing, the mounting kit is the failed component — not the filter itself. In most JennAir JBRFL and JBRFR column refrigerators, this is caused by a failed or broken filter housing mounting kit. When it fails, the filter housing loses its secure anchor point — causing the housing to shift, leak at the connection, or prevent the filter from seating and locking correctly. ⚡ Common failure point in JennAir built-in column refrigerators. Part W11248063 is the genuine OEM replacement that restores a secure, leak-free filter housing mount and correct filter operation immediately.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Refrigerator is cooling and operating normally
• ✔ Water supply line and inlet valve are confirmed functional
• ✔ Filter itself has been replaced recently or is confirmed good
• ✔ Filter housing is visibly loose, cracked, or misaligned in its mount
• ✔ ONLY problem is filter housing movement, dripping at the housing, or filter not locking in

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Water filter housing is loose, wobbles, or has shifted out of position
• Dripping or slow leak at the filter housing connection point
• Water filter won’t lock or click into place correctly
• Filter housing bracket is cracked, broken, or missing mounting tabs
• Water dispenser flow is reduced or intermittent despite a new filter
• Rattling noise from the filter area during compressor or dispenser operation

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this mounting kit restores a secure, leak-free filter housing immediately.

📦 Part Details

• Part Number: W11248063
• Type: Refrigerator Water Filter Housing Mounting Kit (Item #14 in diagram)
• Replaces: W11040339 — no modification required
• Brands: JennAir

⚙️ Installation Notes

Skill Level: EASY — 15–20 minutes. Disconnect power and shut off the water supply before servicing. Remove the existing filter and housing assembly, unclip or unscrew the old mounting bracket from the cabinet wall, transfer any retained hardware to the new kit, and reinstall in reverse order. Confirm the housing is fully seated and locked before restoring water supply and testing for leaks.

💡 Pro Tip

JBRFL24IGX00, JBRFL24IGX10, JBRFL30IGX00, JBRFL30IGX10, JBRFL36IGX00, JBRFL36IGX10, JBRFR24IGX00, JBRFR24IGX10, JBRFR30IGX00, JBRFR30IGX10, JBRFR36IGX00, JBRFR36IGX10

✓ Model-Specific Repair Pages