Refrigerator Door Not Sealing? Door Assembly LW10798950 – Fix Fresh-Food Door Failures Fast
A damaged or warped fresh-food door assembly causes warm spots, frost buildup, and rising energy bills — and LW10798950 is the OEM fix. In most Whirlpool-built top-mount refrigerators, door seal failures are caused by a cracked, warped, or physically damaged door assembly. When it fails, warm air infiltrates the fresh-food compartment, food spoils faster, the compressor runs continuously, and frost accumulates on interior walls. ⚡ Common failure point in Whirlpool-platform refrigerators including Amana ART-series and Whirlpool WRT-series models. Part LW10798950 is the genuine OEM stainless-steel replacement door assembly — including door gasket and door cup — that restores a full airtight seal and eliminates temperature instability immediately.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Refrigerator powers on and compressor runs normally
- ✔ Freezer compartment is maintaining temperature correctly
- ✔ Fresh-food door is visibly cracked, warped, or physically damaged — or gasket is torn/missing
- ✔ ONLY problem is fresh-food door seal failure or door assembly damage
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Fresh-food compartment not holding temperature — food spoiling faster than normal
- Visible gap between door and cabinet when closed
- Frost or ice buildup on fresh-food compartment walls
- Compressor running continuously or cycling more frequently than normal
- Condensation or moisture on exterior of fresh-food door
- Door gasket torn, cracked, or pulling away from door frame
✔ If these symptoms match, the door assembly is the most likely failed component in the system.
✔ In most cases, replacing the door assembly with LW10798950 restores full temperature stability immediately.
📦 Part Details
- Part Number: LW10798950
- Type: Genuine OEM Stainless-Steel Refrigerator Fresh-Food Door Assembly — includes door gasket and door cup
- Replaces: W10798950, W10830305 — no modification required
- Brands: Whirlpool, Amana
While the door is off, inspect the door hinges and hinge pins for wear or misalignment — a sagging hinge is often the root cause of door seal failure and will defeat a new door assembly if not corrected. Also check the door gasket retainer clips to ensure the new gasket seats fully around the perimeter.
⚙️ Installation
Skill Level: MODERATE — 30–60 minutes, two people recommended for safe handling. Disconnect power before servicing. Remove all door shelves and bins before starting. Support the door fully before removing hinge screws — this assembly is heavy. Transfer the door gasket and door cup from the old assembly if not pre-installed, reconnect the water line if applicable, and rehang on existing hinges. Check door alignment and seal contact around the full perimeter before restoring power.
💡 Pro Tip
After installing LW10798950, close the door on a dollar bill at several points around the perimeter. You should feel firm resistance when pulling it out. If it slides freely anywhere, the door is misaligned or the hinge needs adjustment. A proper seal check takes 2 minutes and prevents a callback — don't skip it.
⚠️ BIDIR model hub links pending — handle format verification required for Amana/Whirlpool refrigerator hub pages. Add manually once confirmed.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
