Whirlpool Refrigerator Crisper Drawer Sticking, Binding, or Falling Off Track? Slide Rail WPW10468555 – Fix Drawer Failures Fast

A cracked or broken left-hand crisper drawer slide rail is the most common cause of a Whirlpool refrigerator crisper drawer that sticks, binds, drags, or falls off its track during normal use. In most Whirlpool, KitchenAid, and Maytag refrigerators, the crisper drawer rides on a pair of plastic slide rails mounted to the interior walls — the left-hand rail guides the left side of the drawer and keeps it level and aligned as it opens and closes. When the rail cracks, warps, or breaks, the drawer loses its left-side support, causing it to bind, drag, or drop off the track entirely. ⚡ Common wear item in Whirlpool-built refrigerators — left and right rails wear at the same rate. Part WPW10468555 is the genuine OEM left-hand replacement rail (supersedes W10308863 and W10404449) that restores smooth, level crisper drawer operation immediately — no tools or modification required.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Refrigerator cools and operates normally
• ✔ The problem is on the LEFT side of the crisper drawer — this is the left-hand rail only
• ✔ Right-hand rail confirmed intact (or being replaced separately)
• ✔ Crisper drawer itself confirmed not cracked or warped
• ✔ ONLY problem is drawer sticking, binding, falling off track, or left rail visibly cracked or broken

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Crisper drawer sticking or binding when opening or closing — most common customer complaint
• Drawer falls off track or drops to one side when pulled out
• Left side of drawer drags or catches on the interior wall
• Visible crack, break, or warping on the left-side slide rail
• Drawer doesn’t return to fully closed position correctly
• Grinding or scraping noise when sliding the crisper drawer

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this slide rail restores smooth, level crisper drawer operation immediately.

📦 Part Details

• Part Number: WPW10468555
• Side: LEFT HAND — verify which side you need before ordering; sold individually
• Type: Refrigerator Crisper Drawer Slide Rail — left-hand plastic track that guides and supports the left side of the crisper drawer
• Replaces: OEM direct-fit rail — supersedes W10308863, W10404449 (no modification required)
• Brands: Whirlpool, KitchenAid, Maytag

⚙️ Installation

Skill Level: EASY — 5–10 minutes. No tools required and no need to disconnect power for this repair. Remove the crisper drawer by pulling it fully out and lifting it off the rails. Flex the old left-hand rail to release it from its mounting clips on the interior wall and pull it free. Align the new WPW10468555 rail with the mounting slots and press firmly until the clips snap into place. Reinstall the crisper drawer and slide it in and out several times to confirm smooth, level operation.

✓ Compatible Models

Confirmed compatible with select Whirlpool, KitchenAid, and Maytag refrigerator models. Contact us to verify your model number before ordering.

💡 Pro Tip

✓ Model-Specific Repair Pages