Whirlpool Corporation Cooktop Infinite Switch / Surface Element Control Switch WPW10326246, Replaces W10326246

Genuine Whirlpool OEM infinite switch that controls a cooktop surface burner by turning the element on and off and regulating heat level. Documented for select Whirlpool, Amana, Maytag, KitchenAid, Jenn-Air, and IKEA electric cooktops/ranges. Some retailer documentation identifies it as a left-front or right-front switch, so position should be verified against the appliance model.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Surface element does not turn on.
• Surface element remains on high instead of regulating heat.
• Heat level is inconsistent or difficult to control.
• Cooktop power light may remain on after the control is turned off when switch contacts have failed.

Check Before Replacing

• Disconnect electrical power to the cooktop before inspection or continuity testing.
• Verify the symptom follows the specific surface-element control and is not caused by a tripped breaker, supply problem, loose wiring, or another switch.
• With power disconnected, inspect the switch terminals and wiring for loose, damaged, or overheated connections.
• If qualified to use a multimeter, test the suspected switch only with power disconnected and the relevant terminals isolated, following the appliance wiring diagram; compare results with the switch's expected open/closed behavior in the OFF position.
• Confirm the switch location and element rating against the appliance model's wiring diagram before replacement.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM infinite switch.
• Designed for a single cooktop surface element control circuit.
• Used in select Whirlpool, Amana, Maytag, KitchenAid, Jenn-Air, and IKEA electric cooktops and ranges.
• Replaces previous Whirlpool number W10326246.
• Some listings identify this version as a left-front switch; other retailer data identifies a right-front or specific burner position, so position must be model-verified.
• Retailer technical data describes the component as intended for a 6-inch, approximately 1500-watt burner in some applications; do not generalize that rating across every compatible model.

Installation Notes

• Disconnect the cooktop from electrical power at the breaker or other approved disconnect before servicing.
• Verify that WPW10326246 is the correct switch for the specific burner position and appliance model before removing the existing part.
• Document or photograph wire locations before disconnecting the old switch, then reconnect the replacement according to the appliance wiring diagram.
• Restore power only after the switch, wiring, and control panel components are secured and clear of accidental contact.
• If the cooktop has different switch ratings or burner positions, use the model-specific parts diagram rather than substituting this switch based only on physical appearance.

Verified Compatible Models

ACC6340KFB00, ACC6340KFW00, AEC6540KFB00, AEC6540KFB01, G7CE3034XB00, G7CE3034XC00, G7CE3034XP00, G7CE3055XB00, G7CE3055XS00, G7CE3635XB00, G7CE3635XB01, G7CE3635XP00, G7CE3635XP01, G7CE3635XS00, G7CE3635XS01

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.