THE RANGE MAY BE UNRESPONSIVE OR MAY NOT CORRECTLY CONTROL OVEN FUNCTIONS
Whirlpool Range Main Control Board WPW10464535, Fixes The range may be unresponsive or may not correctly control oven functions
Genuine Whirlpool OEM main electronic control board for compatible Jenn-Air and related range models.
Part WPW10464535Replaces W10335686, W10344181, W10464535Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWPW10464535
ReplacesW10335686, W10344181, W10464535
ManufacturerWhirlpool
Appliance TypeRange
Part TypeRange Main Control Board
✅ Cross Reference Information
Current Part NumberWPW10464535
ReplacesW10335686, W10344181, W10464535
Common Symptoms
- Range or oven display is blank or does not respond to touch inputs.
- Oven will not turn on, heat, or maintain the selected temperature.
- Oven continues heating or will not shut off when commanded.
- Oven temperature, fan, burner, or other electronically controlled functions operate erratically.
- Error codes or abnormal control behavior may appear.
Check Before Replacing
- Confirm the range has electrical power and that the household circuit breaker or fuse has not tripped.
- Check that the display and user-interface inputs respond, while avoiding any conclusion that the control board is defective based on symptoms alone.
- With power disconnected, inspect the control-board wiring harnesses and connectors for looseness, damage, corrosion, or signs of overheating.
- If available for the exact range model, review the model-specific service diagnostics and stored error codes before replacing the board.
- If the oven is heating when commanded off, have a qualified technician verify the control outputs and rule out a shorted heating element, relay, wiring fault, or another component.
Pro Tip
Because the board controls multiple functions, compare the symptom pattern with the exact model’s service information and verify power, wiring, and related loads before condemning the control board.
Part Details
Part NumberWPW10464535
Part TypeRange Main Control Board
ManufacturerWhirlpool
Appliance TypeRange
Primary FunctionControls and coordinates the range’s user interface, display, temperature-control logic, heating-related outputs, and other electronically controlled oven/range functions.
Installation Notes
- Disconnect electrical power to the range before servicing.
- Use the exact model’s service or installation documentation for access and connector identification.
- With power disconnected, document or label connector locations before transferring wiring to the replacement board.
- Inspect connectors and harnesses during replacement; do not install a new board over visibly damaged wiring or connectors.
- After installation, restore power and verify the display, controls, oven operation, and other model-supported functions according to the model-specific service instructions.
Verified Compatible Models
JDRP430WP00, JDRP430WP01, JDRP430WP02, JDRP436WP00, JDRP436WP01, JDRP436WP02, JDRP436WP03, JDRP536WP00, JDRP536WP01, JDRP536WP02, JDRP536WP03, JGRP430WP00, JGRP430WP01, JGRP430WP02, JGRP436WP00
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
