Whirlpool Washer Drain Pump WPW10605427 – OEM & Premium XPart Options Available
Whirlpool Washer Drain Pump WPW10605427 – OEM & Premium XPart Options Available
Whirlpool Washer Drain Pump WPW10605427 – OEM & Premium XPart Options Available
Whirlpool Washer Drain Pump WPW10605427 – OEM & Premium XPart Options Available
Whirlpool Washer Drain Pump WPW10605427 – OEM & Premium XPart Options Available

Whirlpool Washer Drain Pump WPW10605427 – OEM & Premium XPart Options Available

Price
$89.72
Buying Options: OEM

Product variant with selected options does not exist!

Frequently Bought Together

OEM & Premium XPart Options Available

Whirlpool Washer Drain Pump WPW10605427 – OEM & Premium XPart Options Available

Part# WPW10605427 Replaces W10605427 Replaces W10425238 Fits Whirlpool Fits Maytag

Washer Won’t Drain or Stops Mid-Cycle? Drain Pump WPW10605427 – Fix Standing Water Fast

If your Whirlpool or Maytag front-load washer won’t drain, stops mid-cycle with standing water in the drum, or triggers a drain fault code, a failed drain pump is the most likely cause. In most Whirlpool-built front-load washers, the drain pump motor assembly evacuates water from the tub at the end of each wash and rinse cycle. When the pump seizes, the impeller cracks, or a foreign object jams the housing, the washer can’t drain — the control board detects the fault, halts the cycle, and locks the door with a full load of soaking wet laundry inside. ⚡ One of the highest-volume washer repairs across the Whirlpool and Maytag front-load lineup. Part WPW10605427 is the genuine OEM replacement that restores full drain function and clears fault codes, directly superseding W10605427 and W10425238 with no modification required.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

  • ✔ Washer powers on and controls respond normally
  • ✔ Wash and rinse cycles run — only the drain phase fails or the machine stops before spin
  • ✔ Drain hose is clear of kinks and the standpipe or utility sink is not blocked
  • ✔ Pump filter has been checked and cleared of debris, coins, or foreign objects
  • ✔ ONLY problem is standing water in the drum, a drain error code (F5E2, F8E1, or similar), or the machine stopping before the spin cycle

Not sure? Send us your model number — we’ll confirm before you order.

🔧 Common Symptoms

  • Washer won’t drain — standing water remains in the drum at the end of a cycle
  • Washer stops mid-cycle and won’t advance to spin — door locked with wet laundry inside
  • Drain error code displayed (F5E2, F8E1, Sd, or similar depending on model)
  • Loud humming, grinding, or rattling noise during the drain phase
  • Clothes come out soaking wet — spin cycle never engages because drain didn’t complete
  • Washer drains very slowly or only partially empties the tub before stopping

✔ If these symptoms match, the drain pump is the most likely failed component in the system.

✔ In most cases, replacing the drain pump restores full drain and spin operation immediately.

📦 Part Details

  • Part Number: WPW10605427
  • Type: Washer drain pump motor assembly — evacuates water from the tub during drain and spin cycles
  • Replaces: OEM direct-fit drain pump — supersedes W10605427, W10425238 (no modification required)
  • Brands: Whirlpool, Maytag
⚠️ Clear the Pump Filter Before Installing the New Pump:
A seized pump is often caused by a coin, button, or debris lodged in the pump filter or impeller housing — not a failed motor. Before fitting the new pump, remove and clear the filter and inspect the impeller cavity for obstructions. Skipping this step risks jamming the replacement pump within the first few cycles.

⚙️ Installation

Skill Level: MODERATE — 30 to 50 minutes. Disconnect power to the washer at the breaker before starting — never work on a live appliance. Place towels and a shallow pan under the pump area before releasing hose clamps — residual water will spill when the inlet and outlet hoses are disconnected. Release the spring clamps, disconnect the pump wiring harness, remove the mounting screws, and install the new WPW10605427 in the same position. Inspect the harness connector for corrosion or heat damage before reusing. Reconnect hoses and harness, reassemble the access panel, restore power, and run a drain-only cycle while checking for leaks at both hose connections.

💡 Pro Tip

Check the Drain Hose Height Before Blaming the Pump:
A drain hose that drops below the washer’s base level will siphon water back into the tub after every drain cycle — mimicking a failed pump exactly. The hose standpipe connection must be between 96cm and 244cm (38–96 inches) above the floor. If the hose is too low, repositioning it costs nothing and may resolve the issue without any parts. Confirm the hose height before ordering a pump, and always check it again after installation to prevent a repeat call.

🔗 Model Repair Pages

7MMHW5500FC0, 7MMHW5500FC1, 7MMHW5500FW0, 7MMHW5500FW1, 7MMHW7100DC0, 7MMHW7100DW0, 7MWFW72HEDW0, 7MWFW75HEFW0, 7MWFW75HEFW1, 7MWFW81HEDW0, 7MWFW87HEDC0, 7MWFW90HEFC0, 7MWFW90HEFC1, 7MWFW90HEFW0, 7MWFW90HEFW1, 7MWFW95HEDU0, 7MWFW97HDBD0, CFWH4084GW0, MHW3000BG2, MHW3000BW2, MHW3100DW0, MHW3500FW0, MHW3500FW1, MHW3505FW0, MHW3505FW1, MHW4000BW2, MHW4100DW0, MHW4200BG2, MHW4200BW2, MHW4300DC0, MHW4300DW0, MHW5100DC0, MHW5100DW0, MHW5400DC0, MHW5400DW0, MHW5500FC0, MHW5500FC1, MHW5500FW0, MHW5500FW1, MHW6000AG1, MHW6000AG2, MHW6000AW1, MHW6000AW2, MHW7000AG2, MHW7000AW2, MHW7100DC0, MHW7100DW0, MHW8100DC0, MHW8100DW0, MHW8200FC0, MHW8200FW0, NFW5700BW1, NFW5800DW0, WFW61HEBW1, WFW70HEBW2, WFW72HEDW0, WFW75HEFW0, WFW7540FW0, WFW7590FW0, WFW80HEBC2, WFW80HEBW2, WFW81HEDW0, WFW85HEFC0, WFW85HEFC1, WFW85HEFW0, WFW85HEFW1, WFW8540FW0, WFW8540FW1, WFW86HEBC2, WFW86HEBW2, WFW8640BC2, WFW8640BW2, WFW87HEDC0, WFW87HEDC1, WFW87HEDW0, WFW87HEDW1, WFW88HEAC1, WFW88HEAC2, WFW88HEAW1, WFW88HEAW2, WFW8740DC0, WFW8740DC1, WFW8740DW0, WFW8740DW1, WFW90HEFC0, WFW90HEFC1, WFW90HEFW0, WFW90HEFW1, WFW9290FBD0, WFW9290FC0, WFW9290FW0, WFW92HEFBD0, WFW92HEFC0, WFW92HEFU0, WFW92HEFW0, WFW94HEAC2, WFW94HEAW2, WFW95HEDC0, WFW95HEDU0, WFW95HEDW0, WFW97HEDC0, WFW97HEDU0, WFW97HEDW0, WFW97HEDBD0

✓ Model-Specific Repair Pages

✅Compatibility & Cross Reference

Drain Pump, Water Pump, Drain Motor, Pump Assembly

W10425238, W10605427, W10799064, W10799065, W10903216, W10918044, WPW10425238

7MMHW5500FC0, 7MMHW5500FC1, 7MMHW5500FW0, 7MMHW5500FW1, 7MMHW7100DC0, 7MMHW7100DW0, 7MWFW72HEDW0, 7MWFW75HEFW0, 7MWFW75HEFW1, 7MWFW81HEDW0, 7MWFW87HEDC0, 7MWFW90HEFC0, 7MWFW90HEFC1, 7MWFW90HEFW0, 7MWFW90HEFW1, 7MWFW95HEDU0, 7MWFW97HDBD0, CFWH4084GW0, MHW3000BG2, MHW3000BW2, MHW3100DW0, MHW3500FW0, MHW3500FW1, MHW3505FW0, MHW3505FW1, MHW4000BW2, MHW4100DW0, MHW4200BG2, MHW4200BW2, MHW4300DC0, MHW4300DW0, MHW5100DC0, MHW5100DW0, MHW5400DC0, MHW5400DW0, MHW5500FC0, MHW5500FC1, MHW5500FW0, MHW5500FW1, MHW6000AG1, MHW6000AG2, MHW6000AW1, MHW6000AW2, MHW7000AG2, MHW7000AW2, MHW7100DC0, MHW7100DW0, MHW8100DC0, MHW8100DW0, MHW8200FC0, MHW8200FW0, NFW5700BW1, NFW5800DW0, WFW61HEBW1, WFW70HEBW2, WFW72HEDW0, WFW7540FW0, WFW7590FW0, WFW75HEFW0, WFW80HEBC2, WFW80HEBW2, WFW81HEDW0, WFW8540FW0, WFW8540FW1, WFW85HEFC0, WFW85HEFC1, WFW85HEFW0, WFW85HEFW1, WFW8640BC2, WFW8640BW2, WFW86HEBC2, WFW86HEBW2, WFW8740DC0, WFW8740DC1, WFW8740DW0, WFW8740DW1, WFW87HEDC0, WFW87HEDC1, WFW87HEDW0, WFW87HEDW1, WFW88HEAC1, WFW88HEAC2, WFW88HEAW1, WFW88HEAW2, WFW90HEFC0, WFW90HEFC1, WFW90HEFW0, WFW90HEFW1, WFW9290FBD0, WFW9290FC0, WFW9290FW0, WFW92HEFBD0, WFW92HEFC0, WFW92HEFU0, WFW92HEFW0, WFW94HEAC2, WFW94HEAW2, WFW95HEDC0, WFW95HEDU0, WFW95HEDW0, WFW97HEDBD0, WFW97HEDC0, WFW97HEDU0, WFW97HEDW0

Whirlpool, Maytag, Amana

Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions