GE Freezer Not Staying Cold or Door Seal Feels Warm? Replace Freezer Door Gasket WR01L14242 – Fix the Seal Fast

Your GE freezer isn’t holding temperature — frost builds up, food softens, and the compressor runs constantly. In most GE refrigerators, this is caused by a failed freezer door gasket. When it cracks, tears, or loses its magnetic seal, warm air enters the freezer continuously — forcing the compressor to overwork and driving up your energy bill. ⚡ Common failure point in GE-built refrigerators. Part WR01L14242 is the genuine OEM replacement that restores an airtight magnetic seal and stops warm air infiltration in one direct-fit swap. Supersedes WR01L10671, WR14X25030, 225D8452P011, WR14X40076, and 294D1481P006.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Refrigerator powers on and compressor runs
• ✔ Fresh food compartment is cooling normally
• ✔ Freezer temperature is inconsistent or warmer than set point
• ✔ Door closes but seal feels soft, cracked, or doesn’t grip the cabinet
• ✔ ONLY problem is the freezer door seal — not the compressor or refrigerant

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Freezer not holding temperature — food softening or partially thawing
• Frost or ice buildup on freezer walls or around the door frame
• Compressor running constantly or cycling more than normal
• Warm or soft spot felt along the freezer door edge when closed
• Condensation or moisture around the freezer door seal
• Dollar bill test fails — paper slides out easily when door is closed

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this gasket restores normal freezer temperature immediately.

📦 Part Details

• Part Number: WR01L14242
• Type: Freezer Door Gasket — magnetic seal, black
• Replaces: OEM direct-fit gasket assembly — supersedes WR01L10671, WR14X25030, 225D8452P011, WR14X40076, 294D1481P006 (no modification required)
• Brands: GE, GE Profile, GE Café, GE Monogram, Hotpoint

⚙️ Installation Notes

Skill Level: Easy–Moderate — 20–30 minutes. Unplug the refrigerator before beginning. The freezer door gasket is retained by screws behind the inner door liner — loosen (do not fully remove) the retainer screws around the perimeter, tuck the new gasket behind the retainer, and re-tighten. On some models the gasket simply presses into a channel — pull the old one out and press the new one in starting at the corners. If the new gasket arrives folded, soak it in warm water for 5–10 minutes to relax it before installation. Confirm the door closes with firm magnetic resistance on all four sides before restoring power.

✓ Compatible Models

Confirmed compatible with the following GE refrigerator models:

CWE19SP2NTS1, CWE19SP2NWS1, CWE19SP3NTD1, CWE19SP3NWD1, CWE19SP4NTW2, CWE19SP4NWW2, DFE24JSNLKSS, DFE24JYRBKFS, DFE24JYRCKFS, DFE24JYRDKFS, GDE25EYKFRFS, GNE25DSKJKSS, GNE25DSKLKSS, GNE25DYRBKFS, GNE25DYRCKFS, GNE25DYRLKFS, GNE25JGJAFBB, GWE19JGLWFBB, GWE19JMLWFES, GWE19JSDKFSS, GWE19JSLDFSS, GWE19JYLFFFS, ICO19JSPBRSS, IDF25EYRACFS, IDF25EYRCCFS, INF25FYRACFS, INF25FYRBCFS, IWO19JSPBFSS, MDF25EYRACFS, MDF25EYRBCFS, PDF19EBTACDS, PFE24HBMNKTS, PFE24HMLRKES, PFE24HMLSKES, PFE24HMLTKES, PFE24HSLJKSS, PFE24HYRBKFS, PFE24HYRLKFS, PFE24HYRMKFS, PFF25LERACDS, PFF25LERBCDS, PFF25LYRACFS, PFF25LYRBCFS, PFQ25LERBCDS, PFQ25LERCCDS, PNE25NGLLKBB, PNE25NGLRKBB, PNE25NGLSKBB, PNE25NGLTKBB, PNE25NMLRKES, PNE25NMLSKES, PNE25NMLTKES, PNE25NYRBKFS, PNE25NYRCKFS, PNE25NYRDKFS, PNF25FYRACFS, PNF25FYRBCFS, PNQ25IMPBCES, PNQ25IMPCCES, PWO19JSRBFFS, PWO19JSRCFFS, PWR19JSRBFFS, PWR19JSRCFFS, PYE18HBLNKTS, PYE18HEMKKDS, PYE18HEMNKDS, PYE18HMLRKES, PYE18HMLSKES, PYE18HMLTKES, PYE18HYRBKFS, PYE18HYRLKFS, PYE18HYRMKFS, PYF19JYRAFFS, PYF19JYRCFFS

Contact us to verify your model number before ordering.

💡 Pro Tip

✓ Model-Specific Repair Pages