OVEN DOOR DOES NOT CLOSE OR ALIGN PROPERLY
Danby Range Door Hinge WS01L17332, Fixes Oven door does not close or align properly
Range/oven door hinge for Danby 24-inch electric ranges. The Danby parts catalogs identify WS01L17332 as “HINGE DOOR.”
Part WS01L17332Replaces 295D3134P007Danby
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWS01L17332
Replaces295D3134P007
ManufacturerDanby
Appliance TypeRange
Part TypeDoor Hinge
✅ Cross Reference Information
Current Part NumberWS01L17332
Replaces295D3134P007
Common Symptoms
- Door sits unevenly or sags
- Door will not remain properly closed
- Door opens or closes abnormally
- Poor door seal that may allow heat to escape
- Visible hinge bending, looseness, or breakage
Check Before Replacing
- With the range cool, visually compare the door-to-frame gaps on both sides for uneven alignment.
- Check whether the door closes fully and contacts the oven frame evenly without forcing it.
- Inspect the hinge area for visible bending, cracking, looseness, or a hinge arm that does not move normally.
- If the door has been removed, confirm that both hinge arms are seated in the oven slots and that both hinge locks are released before closing the door.
- Do not continue using the range if the door is unstable, cannot close securely, or has damaged glass.
Pro Tip
A door that appears misaligned may result from incorrect hinge-arm seating after door removal; verify both hinge arms and hinge locks before replacing the hinge.
Part Details
Part NumberWS01L17332
Part TypeDoor Hinge
ManufacturerDanby
Appliance TypeRange
Primary FunctionSupports the oven door and controls its opening, closing, alignment, and seal on compatible Danby 24-inch electric ranges.
Installation Notes
- Allow the oven and door to cool before handling the door.
- The oven door is heavy; use two people when removing or installing it.
- When reinstalling the door, firmly hold both sides, insert and seat the upper and lower hinge arms in the oven slots, and lower the hinge locks over the hinge hooks.
- Do not attempt to close the door until it is properly installed, because the hinges could be damaged.
- After installation, confirm that the door closes evenly and completely; if it is uneven, remove and reseat it according to the owner’s manual.
Verified Compatible Models
DER244BSSC, DER244WC, SER244WC, CME6090CFIYX0A, CME6095FGYX0A, DER244BSSC A, DER244WC A, EM6090CFIX0A, EME6095FGX0A, IO6090CFIX0A, JCAS300DM1WW, JCAS300RP1SS, JCGAS300DM1WW, JCGAS300DM2WW, PRO247SS-1A, PRO247SS-1B, RE2411W-1A, REX2421W-1A, REX2421WRT-1A, REX2421WRT-1B, REX2431B-1A, REX2431BRT-1A, REX2431BRT-1B, REX2451SS-1A, REX2451SSRT-1A, REX2451SSRT-1B, RG244WS-1A, RG244WS-1B, RGAS300DM1WW
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
