GE Range Burner Won't Spark? Ignitor WG02F14957 – Fix Dead Surface Burner Ignition Fast
A failed surface burner ignitor is the most common reason a GE gas range burner won't click, spark, or light. In most GE gas ranges, each surface burner has a dedicated ignitor that generates the spark to ignite the gas. When it fails, that burner will not light — even if the gas supply is fine and other burners work normally. ⚡ Common failure point in GE, Hotpoint, and Café gas ranges. Part WG02F14957 is the genuine OEM replacement that restores reliable spark ignition to the affected burner.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ The range powers on and the clock/controls work normally
- ✔ Gas supply to the range is confirmed on and flowing
- ✔ Other surface burners ignite correctly
- ✔ ONLY problem is one burner that won’t click, spark, or light
Not sure? Send us your model number — we’ll confirm before you order.
🔧 Common Symptoms
- One surface burner won’t click or spark when turned on
- Burner clicks repeatedly but never lights
- Burner lights only with a match or lighter, not automatically
- Visible cracks or carbon buildup on the ignitor tip
- Ignitor glows but produces no spark
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this ignitor restores normal burner ignition immediately.
📦 Part Details
- Part Number: WG02F14957
- Type: Surface Burner Ignitor — OEM GE replacement
- Brands: GE, Hotpoint, Café
While the burner cap is off, inspect the burner cap and head for cracks or carbon buildup — a damaged cap can cause weak or uneven flames even after the ignitor is replaced. If the cap shows wear, replace it at the same time to ensure a complete repair.
⚙️ Installation
Skill Level: Easy — 15–25 minutes. Disconnect power before servicing. Remove the burner grate and cap to access the ignitor, disconnect the wire harness, and swap in the new WG02F14957. Reinstall the cap and grate, restore power, and test ignition on the repaired burner.
✓ Compatible Models
Confirmed compatible with select GE, Hotpoint, and Café gas range models. Contact us to verify your model number before ordering.
💡 Pro Tip
When a single burner won’t spark but everything else works, the ignitor is the first and most likely cause — not the spark module or wiring. The spark module fires all burners simultaneously; if only one is dead, the module is fine. Replace the ignitor for that burner first. If two or more burners fail at the same time, then investigate the spark module.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
